M
machoheadgames
LED turn signal club From Dallas, TX
Latest activity Postings Attachments Images About
-
-
Mmachoheadgames replied to the thread Help identifying wires and a harness.Backup light is violet/white and violet/black. Also, to be so close to the shift tower opening tells the story. The tcase indicator plug...
-
Mmachoheadgames replied to the thread Help identifying wires and a harness.Manual transmission jumper harness, as stated above that is the backup light circuit and the starter relay ground circuit is looped...
-
Mmachoheadgames replied to the thread Super 35 kit?.If you have stock gearing, then you're geared 32% taller than stock. That is significant. With the 37's and stock axle ratio, both 4th...
-
Mmachoheadgames replied to the thread Positive battery terminal contacted body, Jeep wont start.Read through the thread and didn’t see it mentioned….i know it isn’t the topic at hand but did you make sure to secure the battery down...
-
Mmachoheadgames replied to the thread Super 35 kit?.I’d drop it to 33’s and run 5.13s. Even 35’s with 5.13 and the 4 cylinder will still somewhat suck. All of it will feel dramatically...
-
Mmachoheadgames replied to the thread Part numbers and resources for constant tension hose clamps.Yeah, not sure. I got rid of most of mine early on, in 2013, and then in 2016 when I needed to do an overhaul I added them back once I...
-
Mmachoheadgames replied to the thread Part numbers and resources for constant tension hose clamps.I still had some factory original clamps, and some that were replacement factory clamps from years back that I used to replace the worm...
-
Mmachoheadgames replied to the thread Part numbers and resources for constant tension hose clamps.Just wanted to add to this thread. I appreciated the Mopar part numbers in the first post, however, since there’s some weirdness with...
-
Mmachoheadgames replied to the thread Change carrier after regear. Can i do it my self?.Gotcha. Well, the carriers are machined very close to the correct size. There is a chance that the carrier will fit up close enough to...
-
Mmachoheadgames reacted to Holm's post in the thread Change carrier after regear. Can i do it my self? with
Like.
Yes that was there, left side. I ment extra shims. My bad :0) . -
Mmachoheadgames replied to the thread Change carrier after regear. Can i do it my self?.You’ve gotta have some sort of shim in there currently. From factory, the Dana 35 has around 0.320” of shim on the carrier. The carrier...
-
Mmachoheadgames replied to the thread Change carrier after regear. Can i do it my self?.You would need to measure backlash on the current setup and then possibly need to shim the carrier left or right to maintain proper...
-
Mmachoheadgames replied to the thread Euro style tail lights.Meh. Those are pretty awful at doing what they’re supposed to do. I forget that Blaine sells a light now. That would probably work well.
-
Mmachoheadgames replied to the thread Euro style tail lights.I see. I thought you were thinking yours came stock under the plate, which I wanted to clarify it shouldn’t have. Something custom...
-
Mmachoheadgames replied to the thread Euro style tail lights.I don’t think the original position was ever under the tail lamp in export countries…was it? All the OEM lamps with the amber don’t seem...
-
-
Loading…
-
Loading…
-
Loading…
-
Loading…